Search Results

MPN: HX4-06224 Manufacturer: CubePilot CAN Cable *2I2C Cable * 2Buzzer Cable * 1MICRO USB Cable * 1GPS1 GH Cable * 1Power Brick Mini Cable * 1

SKU: MAUCH-017 Manufacturer: Mauch Electronics User Manual: DOWNLOAD Input 4-6S LiPo / max. 28V. Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2...

MPN: HX4-06046 Manufacturer: CubePilot -2m Reel of individually programmable RGB LEDs

Manufacturer: Airbot Systems The Mini carrier Board is one of the best ways to integrate a pixhawk 2.1 cube into a drone. It provides maximum connectivity in a small size. Now accompanied by a Mini PDB, this combo is ideal for installing a cube in any drone, and simplifies the installation of the autopilot, even...

MPN: CABLE-RPSMA-EXT-15cm-R/A Manufacturer: RFDesign Product Description: This is an RF extension cable with RPSMA male/female terminations. It has a bulkhead fitting on the RPSMA(F) end to allow mounting through panels to get the best antenna location. The bulkhead fitting will allow approximately a 6mm thick wall to be penetrated, with allowance for...

Manufacturer: Airbot Systems The Airbot Systems Mini Power Brick is a compact power supply module designed to deliver regulated power to UAV flight controllers while providing accurate battery voltage and current monitoring. Engineered for professional unmanned systems, it supports up to 12S input voltage and delivers 3A continuous regulated output (4A...

SKU: MAUCH-015 Manufacturer: Mauch Electronics User Manual: DOWNLOAD Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with...

MPN: CAB_195 The SF30 / SF45 Communication and Power Cable (MPN: CAB_195) is a 350mm dual-connector cable designed specifically for use with SF30 and SF45 LiDAR rangefinders. It provides both stable power delivery and reliable data communication between the sensor and compatible flight controllers or integration systems. Engineered for secure connections and...

MPN: HX4-06263 Previous MPN: HX4-06159 (different packaging) Manufacturer: CubePilot The original Cube Orange Set is back in stock again. Cube Orange This Combo Contains: 1x HX4-06160 The Cube Orange 1x HX4-06105 ADSB Carrier Board 1x HX4-06008 Power Brick Mini 1x HX4-06217 The Cube Standard Cable Set 1x HX4-06152 CAN BUS...

SKU: MAUCH-059 Manufacturer: Mauch Electronics This switch connects to any Power-Cube “V3” or 030: 2x 200A PDB and acts like an manual power on/off control. It isn't just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off. The switch...

MPN: HX4-06233-B Manufacturer: CubePilot

MPN: CP-06313-1111 Manufacturer: CubePilot Product Description: The CubePilot CubeNode (MPN: CP-06313-1111) is a high-performance development platform designed for building, testing, and integrating UAV subsystems and embedded components. It provides a flexible foundation for developing navigation systems, communication modules, sensors, payloads, and other autonomous system components. Powered by a dual-core Arm® Cortex® architecture, the...

SKU: MAUCH-022 Manufacturer: Mauch Electronics User Manual: DOWNLOAD Input 4-14S LiPo / max. 60V. Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output connector with Molex...

SKU: MAUCH-065 Manufacturer: Mauch Electronics To connect Power-Cube output 1 to JST-GH 6pin such as the Holybro Durandal, Pixhawk 4, 4 mini .... Length = 200mm

MPN: CP-06313-1110 Manufacturer: CubePilot Product Description: The CubePilot CubeNode (MPN: CP-06313-1110) is a high-performance development platform designed for creating, testing, and integrating advanced UAV and embedded system components. It provides a flexible environment for developing navigation systems, communication modules, sensors, payloads, and other autonomous technologies. Built on a dual-core Arm® Cortex® architecture, the...

Manufacturer: Airbot Systems The PRO v2 is the most efficient setup for integrating a Cube into a vehicle. This set ensures maximum connectivity in an extremely small size. Equipped with a PDB integrating two voltage converters (5V3 & 5V3/12V), current and voltage sensors, this set provides all the necessary environment for a complete setup,...