Search Results

MPN: CP-06324Manufacturer: CubePilot NDAA CompliantBeta version of product. For development purposes only. NDAA 2023 Compliant Autopilot Note: The Cube Red Pro is currently in a design update phase. Units purchased will not include future upgrade revisions. The Cube Red is a next-generation UAV autopilot module designed for advanced development, testing, and high-performance...

MPN: A08SUR08SUR32W102A 102mm Communication cable for GRF-series sensors.

SKU: MAUCH-013 Manufacturer: Mauch Electronics User Manual: DOWNLOAD The Sensor Hub X8, is able to collect the current of up to 8 current sensors and pass the summarized current to the FC. The Sensor Hub X8 is compatible with any PL-xxx sensor, but all sensors should be the same current range....

MPN: HX4-06297 Manufacturer: CubePilot The CubePilot CAN Cable (HX4-06297) is a 75cm communication cable designed for reliable DroneCAN connectivity within Cube-based UAV systems. It enables stable data communication between Cube autopilots, GNSS modules, carrier boards, and other compatible CAN peripherals. Engineered for dependable signal transmission and secure connector fitment, this extended-length...

Connect your IR-LOCK Sensor to Cube or Pixhawk2.1. This cable provides I2C communication from IR-LOCK to Cube or Pixhawk2.1, and also powers the IR-LOCK Sensor. Length: 28cm See Documentation for connection instructions.

SKU: MAUCH-075 Manufacturer: Mauch Electronics 200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. The...

MPN: ANT-900-RFDFLEX1-BARE Manufacturer: RFDesign Product Description: This is one of the lightest and slimmest antennas on the market - Suitable for the 900 MHz ISM band. It is designed to operate in free space, or stuck onto a relatively RF transparent material, eg. Foam wing, fuselage, balsa wing, thin fiberglass. It has...

SKU: MAUCH-074 Manufacturer: Mauch Electronics 100A - Current measurement sensor board, based on Allegro Hall Sensor ACS-100U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section....

MPN: 20S552 Manufacturer: Gremsy Compatible with Pixy SM, Pixy MR fully lens supported

MPN: 20M001 Manufacturer: Gremsy Gremsy Mio is a lightweight 3-axis camera stabilizer designed for industrial and commercial UAV integration. Weighing only 250g, Mio delivers precise stabilization for inspection, mapping, and thermal imaging applications while supporting Pixhawk and CubePilot flight control systems. System Overview Parameter Specification Product Type 3-Axis Camera Stabilizer Weight...

MPN: 20S367 Manufacturer: Gremsy Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-frequency vibration and allow smooth footage. The Mio Damping features ultra-lightweight in a small form factor and flexibility to be mounted on various platforms:...

MPN: 20G293-100 Manufacturer: Gremsy

The LW20/HA follows in the footsteps of the highly popular and globally respected LW20/C,with enhancements and improvements in engineering and manufacturing. This delivers aclass leading accuracy of up to 1 cm across the entire 100m distance range. The LW20/HA isprovided in the same small yet robust and easy-to-use form factor that...

MPN: skypt Manufacturer: CamFlite Made from CNC 6061 aluminum and finished with a sleek black anodized coating, the DJI Skyport adapter can be efficiently used with your custom payload without requiring external power.

SKU: MAUCH-015 Manufacturer: Mauch Electronics User Manual: DOWNLOAD Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with...

MPN: CAB_195 The SF30 / SF45 Communication and Power Cable (MPN: CAB_195) is a 350mm dual-connector cable designed specifically for use with SF30 and SF45 LiDAR rangefinders. It provides both stable power delivery and reliable data communication between the sensor and compatible flight controllers or integration systems. Engineered for secure connections and...