Search Results

MPN: CP-06318 Manufacturer: CubePilot Beta version of product. For development purposes only. NDAA 2023 Compliant Autopilot The Cube Red Pro Standard Set represents one of the most advanced open autopilot systems available for autonomous unmanned vehicles. Built for high-reliability applications, it features a dual H7 processor architecture with redundant sensing, isolated...

The SF30/D laser measurement sensor provides real time, accurate altitude (AGL) measurements for UAVs. The lightweight 36 gram design features a time-of-flight range up to 200 meters (656 feet), and an update rate up to 20K readings per second. Typical applications: Assist with takeoff, landing and hovering Altimetry Obstacle warning and...

MPN: HX4-06326 Manufacturer: CubePilot The Magma AA.174 a GNSS external antenna with low axial ratio. It is ideal for robust, covert installations where durability and small size is paramount. It is used in telematics and M2M applications, for example in commercial vehicle installations for fleet management. It comes with a 3 meter, standard...

SKU: MAUCH-086 Manufacturer: Mauch Electronics The cable is made of AWG28 silicone wires with original Hirose DF13 and MOLEX / Clik-Mate 2.0mm connectors. The total cable length should not exceed 290mm. The cables are "handmade" and electrically tested. If no requested cable length is provided, then we will deliver the standard...

SKU: MAUCH-076 Manufacturer: Mauch Electronics 200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. The...

SKU: MAUCH-030 Manufacturer: Mauch Electronics User Manual: DOWNLOAD All in one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an continues current of 400A. The outputs...

SF30/C is a long range (0 ... 100 meter), light-weight, laser altimeter module designed specifically for use on UAVs (multi-copter or fixed wing).Typical applications: Warning of FAA flight limits. Precision photography. Terrain following. Assist with takeoff, landing and hovering. The SF10/C provides accurate and fast altitude (AGL) measuring capability, regardless of...

SKU: MAUCH-040 Manufacturer: Mauch Electronics This cable connects between any PL-xxx sensor to the Hub X2-V2, or any BEC from the PL – Series. REM: This cable is standard delivered together with any PL or PC - BEC and Sensor Hub X2-V2

MPN: HX4-06264

MPN: CABLE-PIXHAWK2-RFD-150mm Manufacturer: RFDesign Product Description: This is a cable designed to interface Pixhawk 2 Autopilots to the RFD900.It makes connection simple, with JST-GH 6 way to, 0.1" pitch socket.Length: 150mmWeight: 3.5g

MPN: ANT-900-5dBi-RPSMA Manufacturer: RFDesign Product Description: 900MHz collinear wave dipole antenna with RPSMA connector. This antenna is a dipole antenna with a base connector that can swivel up to 90 degrees. It is well suited to ground station, or fixed installation applications. Frequency range: 860-960MHz Gain: 5 dBi VSWR: < 1.5 Impedance: 50R...

MPN: ANT-800-950-8dBi-RPSMA Manufacturer: RFDesign Product Description: Antenna 800-950MHz dipole with RPSMA connector. This antenna is a dipole antenna with a base connector that can swivel up to 90 degrees. It is well suited to ground station, or fixed installation applications. Frequency range: 800 - 950 MHz Gain: 8 dBi VSWR: < 1.5 Impedance: 50R...

MPN: 20G004 Manufacturer: Gremsy The Gremsy T3 V3 (MPN: 20G004) is a professional 3-axis camera stabilizer designed for UAV cinematography and industrial aerial applications. Engineered for performance and portability, the T3 V3 delivers smooth, precise stabilization while maintaining a compact and integration-friendly form factor. Featuring onboard HDMI and AUX ports, the T3...

MPN: 20G293-B1 Manufacturer: Gremsy Packing List: Pixy LR S-Port Gimbal x1 Pixy LR S-Port Damping x1

MPN: CABLE-RFD900u-Antenna Manufacturer: RFDesign Product Description: This cable allows connection of RPSMA antennas to the RFD900u's u.fl/IPX connector. It is terminated in an RPSMA(F) bulkhead connector, which will allow connection to all of our antennas in the webstore. Length : 150mm, Weight: 4.3g

MPN: MODEM-RFD868ux Manufacturer: RFDesign RFD868ux: This is the RFD868ux on a double-sided mini carrier board. It comes with a mini JST connector and 2x u.Fl RF connectors and heat sink. **It requires the "ux PIXHAWK2 to RFD900 Telemetry Cable" - 150/300mm to interface to your application. RFD868ux New Features: Fully compatible with RFD868x...