Search Results

SKU: MAUCH-081 Manufacturer: Mauch Electronics 3D printed enclosure for the Sensor Hub X2 The enclosure should be installed with double side tape (included). The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue. REM:...

MPN: 20A001-B1 Manufacturer: Gremsy This bundle allows for an easy installation of the Gremsy AEVO under drone platforms that support the 12mm tubes mounting standard. Packing List: AEVO Gimbal x1 AEVO Damping x1

MPN: 20S529 Manufacturer: Gremsy Zio Damping is designed to match perfectly with the Zio payload where 4 silicone-filled rubber balls are used to further remove high-frequency vibration and allow smooth footage. The Zio Damping features ultra-lightweight in a small form factor and a universal mounting plate.

Manufacturer: Gremsy This bundle facilitates the installation of Pixy S & Sony A7R IV beneath the drone system, powering and controlling the camera from the gimbal, enabling easy control, and interfacing with the following: - Cube Pilot Drone system - Skynode Drone system Mounting damping compatible with 12mm rods system. Packing List: Pixy...

MPN: 20M001-B1 Manufacturer: Gremsy This bundle supports the installation of Flir Vue Pro R on MIO, under M600 easily. You can control the FLIR through PWM get from M600 (A3 FC).Note: Only support for the Flir Vue Pro R using Power & HDMI Video Module for Vue Pro. Packing List: MIO x1...

MPN: 20S485 Manufacturer: Gremsy V2.0 distinguishes itself from the prior version by featuring a USB-C 2.0 signal port connecting directly from Quick Release to the tilt gimbal, along with an Aux port offering optional signals (S1-S4) for user connections to devices like AV signals or camera triggers for expanded functionality. The...

MPN: 20S477 Manufacturer: Gremsy

MPN: 20A001 Manufacturer: Gremsy Aevo is the next generation of heavy-lifting gimbal boasting a sturdy carbon frame construction, high encoder resolution, and high-torque brushless motors to handle massive sensors for industrial uses. Specifications: Product Name: AEVO System Type: 3-Axis Camera Stabilizer Weight: 5.8 lbs (2.63kg) Construction: Carbon & Aluminum Input Voltage:...

MPN: 20R001-B1 Manufacturer: Gremsy This Combo contains the following items: Gremsy G-Hadron Gremsy G-Hadron Mainboard

MPN: CONN-RPSMA-PCB0.8 Manufacturer: RFDesign Product Description: PCB Mount RP-SMA RF connector: Suitable for 0.8 - 1.0mm PCB thicknesses. Gold plated brass with teflon insert.

SKU: CABLE-RPSMA-EXT-50cm Manufacturer: RFDesign Product Description: This is an RF extension cable with RPSMA female/female terminations. It has a bulkhead fitting on the RPSMA(F) end to allow mounting through panels to get the best antenna location. Specifications: Total length: 50 cmInsertion loss @ 915 MHz: TBA dB - typicalInsertion loss @ 2450 MHz: TBA...

MPN: CABLE-RFTEST Manufacturer: RFDesign Product Description: This is a coaxial test cable with an SMA connector on one end and stripped center pin available at the other end. The cable is flexible semirigid which has low loss, excellent shielding, is easily solderable and flexible. It is very useful for testing RF...

MPN: Shield-Arduino-RFD900 Manufacturer: RFDesign Product Description: This is an Arduino compatible shield to interface to the RFD900, long range radio modem. If you need long range communications for your Arduino project, this will make connecting the RFD900 to an Arduino easy! It has switchable serial source, from either the hardware...

MPN: HX4-06210 & HX4-06075 Manufacturer: CubePilot What's Inside HX4-06075 Herelink Controller Unit V1.01 x Herelink Controller Unit 2 x Herelink Controller Joystick1 x Herelink Omni-directional Antenna1 x Herelink Directional AntennaHX4-06210 Herelink Air Unit V1.11 x Herelink Air Unit1 x Herelink Mounting Plate1 x Herelink Screw Set1 x Herelink Silicone Ring Set2 x Herelink Taoglas Antenna1 x Herelink Fan1 x Herelink Cable Set1...

MPN: NightRaptor Manufacturer: RFDesign Product Description: This is the NightRaptor! It is an interface to the enable the Solo (from 3DR) to interface to our RFD900x modems. It gives the telemetry range normally available with the RFD900x as well as RC control at the same time through a long range 900MHz...

MPN: HS011